Jump to content

Prints are unleveled with edge popping up


yj250

Recommended Posts

Posted · Prints are unleveled with edge popping up

5a331da6e7ab5_File27-05-2016201433.thumb.jpeg.2c678e7ab9b3871a59efc7976a4551de.jpeg

Please help me with this. the ege of the prints are always higher up than the rest of the prints due to the retraction. Always causing the print pillled off the platform. Could Someone help me with this.

5a331da6e7ab5_File27-05-2016201433.thumb.jpeg.2c678e7ab9b3871a59efc7976a4551de.jpeg

  • Link to post
    Share on other sites

    Posted · Prints are unleveled with edge popping up

    Try to print with the nozzle temperature as cool as possible. And try putting a fan in front of

    the printer, to remove the heat as soon as possible. On very small items, I sometimes gently blow compressed air onto the print to cool it down faster. (Warning: only use compressed air from a compressor, never from a spray can: they may contain highly explosive gasses instead of air, and you don't want that on hot nozzles...).

    More cooling will not eliminate the effect, but it will reduce it.

  • Link to post
    Share on other sites

    Posted · Prints are unleveled with edge popping up

    Are you fans on? With PLA they need to be on 100%

     

    yes, yes, I did put my fans on, and 100%sure I level the bad. I had a second try with everywhere support, It was fine.
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...