Jump to content
Ultimaker Community of 3D Printing Experts
MEgg

Build of libArcus fails for SuSE 13.1

Recommended Posts

I tried to build

https://github.com/Ultimaker/libArcus

Had to install newer cmake because of

"CMake Error at CMakeLists.txt:2 (cmake_minimum_required):

 CMake 2.8.12 or higher is required.  You are running version 2.8.11.2"

This was ok then with

cmake-2.8.12

Then:

"  Could NOT find PythonInterp: Found unsuitable version "3.3.5", but required

 is at least "3.4.0" (found /usr/bin/python3)"

Installed python 3.4.3 which was ok then.

Now I get:

"[...]

-- Looking for include file pthread.h

-- Looking for include file pthread.h - found

-- Looking for pthread_create

-- Looking for pthread_create - not found

-- Looking for pthread_create in pthreads

-- Looking for pthread_create in pthreads - not found

-- Looking for pthread_create in pthread

-- Looking for pthread_create in pthread - found

-- Found Threads: TRUE  

-- Found PROTOBUF: /usr/local/lib64/libprotobuf.so  

-- Found PythonInterp: /usr/local/bin/python3.4 (found suitable version "3.4.3", minimum required is "3.4.0")

-- Found PythonLibs: /usr/local/lib/python3.4 (Required is at least version "3.4.0")

Traceback (most recent call last):

 File "[...]libArcus-master/cmake/FindSIP.py", line 8, in

   import sipconfig

ImportError: No module named 'sipconfig'

CMake Error at cmake/FindSIP.cmake:58 (MESSAGE):

 Could not find SIP

Call Stack (most recent call first):

 CMakeLists.txt:23 (find_package)

-- Configuring incomplete, errors occurred!

[...]"

I have installed

sip-4.18.tar.gz

from

http://pyqt.sourceforge.net/Docs/sip4/installation.html

Any pointers what may be missing here?

I found

https://aur.archlinux.org/packages/arcus/

but obviously this still fails and there is no solution.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!