Try this file I modified and see if it works:
https://www.dropbox.com/s/lel2i7a9hirxgib/UM2_Control.gcode?dl=0
Hi ! This prints great without a problem, nice work ! It doesn't override the machine's settings anymore. I see the flow is automatically set to 638%. I have a flow rate between 2 and 3 mm^3/s. It doesn't scratch the build platform anymore. Thanks !
By the way, what would be the best color to print your models, to have the best vision possible of the seams ?
Recommended Posts
lars86 42
Try this file I modified and see if it works:
https://www.dropbox.com/s/lel2i7a9hirxgib/UM2_Control.gcode?dl=0
Link to post
Share on other sites