Jump to content

prints coming out with strange holes


randomdude583

Recommended Posts

Posted · prints coming out with strange holes

Im using a homebuild ORD Hadron printer with Cura 15.04.6 i recently updated, and ever since the prints have been coming out badly. I have absolutely no clue what happened as i hadn't changed settings before it broke. im including photos of what the prints look like.IMG_20160705_212427.thumb.jpg.89845b10af535e5e23e714b59debb814.jpg

IMG_20160705_212427.thumb.jpg.89845b10af535e5e23e714b59debb814.jpg

  • Link to post
    Share on other sites

    Posted · prints coming out with strange holes

    Hi and welcome,

    That looks like massive underextrusion, are you sure it's related to the slicer? Does an older gcode with your previous version do the same? It might be related to hardware

  • Link to post
    Share on other sites

    Posted · prints coming out with strange holes

    Oh Thank goodness, I thought I was the only 1 to have this problem. It has been a massive ball ache since I updated as well. Before I had no problems with PLA. Only had problems with the Formfutura Brass filled one. But now it is with all my filaments.

  • Link to post
    Share on other sites

    Posted · prints coming out with strange holes

    Why yes, I am!! :) The pic you posted has dramatic underextrusion, can you see light through the nozzle after atomic pulls?

  • Link to post
    Share on other sites

    Posted · prints coming out with strange holes

    Turns out its your filament diameter, you gotta make sure to update that value in Cura or it will fail this way. it works much better now that I changed it

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...