Jump to content

full & not full


zv3d

Recommended Posts

Posted · full & not full

Good morning

I asked politely a question

first of all I have a Prusa i3

use the software CURA for slicer

I recently installed CURA 64-bit

and I was wondering if it is possible to print a complete filling only parts of the 3D model according to a dimensional parameter

For example I have to print a row of columns with 10mm diameter under a 100x100 floor and above a roof of 100x100

I would make sure that the columns were full 10mm diameter while floor and roof not full.

it can be done?

if so, in what way?

thank you very much

Andrew

  • Link to post
    Share on other sites

    Posted · full & not full

    I think he is printing an architectural thing like a roman temple where he wants the columns 100% infill but the rest of the print only 20% infill. Is that what you want? If so you can do that in cura 2.x.x. The feature is called "merge" or something like that where you split the model up into multple parts (columns versus the rest) and then give the different parts different settings and "merge" them into one print.

    Keep in mind that 100% infill is really not much stronger than 24% infill as, like bone, the strength tends to come from the outer shell.

    If I mis understood the question please include a drawing - maybe draw on paper and photograph with your phone.

    • Like 1
    Link to post
    Share on other sites

    Posted · full & not full

    I think he is printing an architectural thing like a roman temple where he wants the columns 100% infill but the rest of the print only 20% infill.  Is that what you want?  If so you can do that in cura 2.x.x.  The feature is called "merge" or  something like that where you split the model up into multple parts (columns versus the rest) and then give the different parts different settings and "merge" them into one print.

    Keep in mind that 100% infill is really not much stronger than 24% infill as, like bone, the strength tends to come from the outer shell.

    If I mis understood the question please include a drawing - maybe draw on paper and photograph with your phone.

    It is exactly what I would do

    thank you so much

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...