Jump to content

Olsen block What watt heater comes with that, note my kit is an older one.


Recommended Posts

Posted · Olsen block What watt heater comes with that, note my kit is an older one.

Are you referring to an Olsson block bought from 3dSolex (or from one of their resellers) or to the UM2+ upgrade kit from Ultimaker? The latter has a 35W heater included. But you can measure the resistance R of the heater and then calculate the power by 24V x 24V / R.

  • Link to post
    Share on other sites

    Posted · Olsen block What watt heater comes with that, note my kit is an older one.

    You mean the Olsson block that was packed with the Ultimaker2 between November 2015 and January 2016? There was no extra heater there but the machines had a 25W heater at that time.

  • Link to post
    Share on other sites

    Posted · Olsen block What watt heater comes with that, note my kit is an older one.

    I really have no Idea how old my machine is. Bought it used from a medical equipment clearing house. The machine read 1 hour print time 20 hours on. and I believe it.

    Supper clean, nothing missing, all the original packing. Outside of box was dirty as pig pen. LOL.

    You're right, Olsson kit didn't have the wire in the box. I guess I got lucky and scored extra regular nozzle with heater wire.( makes it a 25 watt)

    Included pic of machine. As you can see it has no extra filament guides or the holes for it.

    Thanks for your help.

    ED

    IMG_0999.thumb.JPG.0dcc08c2ef0523079822437f3c803f42.JPG

    IMG_0999.thumb.JPG.0dcc08c2ef0523079822437f3c803f42.JPG

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 16 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...