Cura 2.3 (Release) Bug - Filament Diameter Not Changing

[cambunch 0]

I would like to report a bug that is happening to me on the new Cura 2.3 release.

When creating custom materials and defining their filament diameter, the diameter is not updated in my print settings when switching between filament presets.

I am using a custom FDM printer setup without a pre-defined filament diameter, so machine settings should not be overriding filament settings.

I have re-installed and wiped my AppData folder so ensure that no previous settings were affecting this.

Please let me know if there is any other information I can provide!

Edited October 20, 2016 by Guest

[nallath 1,123]

There is always a pre-defined filament diameter. Every setting must have a default within Cura.

[cambunch 0]

So then the question is - why is the filament diameter set in my filaments presets not overwriting the pre-defined value?

[nallath 1,123]

I'm guessing because it's something we haven't tested (as all of our machines use 2.85) and it's something that slipped through.

Changing the filament diameter in the machine should work.