SD Card Stuck in Ultimaker

[Foxi-5 0]

Hi all,

I've been printing happily for a long time now. No real dramas until today. The SD Card is stuck in the Ultimaker. Pushing on it will no longer release it.

Does anyone know if there is a simple way to fix the unit? I've got some pliers handy for when the last print finishes in a few hours, to pull out the card.

I'm a bit reluctant to stick sharp stabby things into the socket in case I rip something apart....

Alas, the machine has been wonderful till a few minutes back.

Many thanks for your responses.

[zoev89 73]

Can you tell what printer you have? For a UMO I would just unscrew the ulticontroler and try from there.

[zoev89 73]

Sorry I just saw you have a ultimaker 2

[DidierKlein 729]

If it's really stuck you might need to have access to the display panel in order to check what is happening.

You might need to check out the assembly manual:

https://github.com/Ultimaker/Ultimaker2/blob/master/um2%20assembly%20manual%20V1.1%20_english.pdf

(starts at page 41)

[Foxi-5 0]

Hi All,

Thanks for your replies, after a bit of looking and fossiking, I've found some shaved plastic that came from the SD Card. Somehow managing to push something askew. Removed the plastic and it's all good now.