Sequence imprimanter

[titi2539 0]

Bonsoir

J'aurai une question comme imprimer en sequenciel c'est a dire une pièce après l'autre (si plusieurs pièce evidament) sous cura 2.4 avec une um3

Il a l'option mais elle ne s'active pas

Merci

[DidierKlein 729]

Visiblement c'est impossible pour le moment car trop complexe à gérer en double extrusion (risque de colision trop élevé).

[titi2539 0]

Wouai je me doute que c'est compliqué mais je voudrait le faire quand simple extrusion snif Merci de ta réponse

[ahoeben 1,955]

c'est compliqué

A potential untested workaround is to add a UM3 definition to Cura that forces it to regard the UM3 as a single extrusion printer. You won't have dual extrusion, but you will have One at a Time printing. Here is such a definition:

https://gist.github.com/fieldOfView/bde7189087721451784865a28f3fc2c1

Place it inside the "definitions" folder either in your Cura application folder or in the "definitions" folder inside your configuration folder. You would then create a new printer inside Cura and pick the "Ultimaker 3 single extrusion" printer definition. You can have both an "Ultimaker 3" and an "Ultimaker 3 single extrusion" printer connected to the same physical printer in Cura, so you can then choose between single extrusion prints that allow One at a Time, and dual extrusion prints that don't.

(My french is not great)

(edit: and neither are my copy/paste skills)

Edited February 25, 2017 by Guest

[f5bqp 11]

Here is such a definition:

https://gist.github.com/...1451784865a28f3fc2c1

 

I got ERROR 404 on this link.

Not a problem with english, I can do it after 35 years working for american corps...

[titi2539 0]

Thank you for your reply could you give me your link because this one does not work error 404

For the reponce in English thanks to goolge translation

[tinkergnome 927]

I got ERROR 404 on this link.

 

ultimaker3_single.def.json

[ahoeben 1,955]

Sorry for the broken link, and thanks @tinkergnome for posting the correct one. I have edited my post above.

Note that I don't have a UM3 myself, so I have not tested the definition. If you try it please report if it works.

[titi2539 0]

Tank you

I'll try this

[tinkergnome 927]

Note that I don't have a UM3 myself, so I have not tested the definition. If you try it please report if it works.

 

A first observation: the default UM3 profiles have the prime tower enabled, and it can not be disabled, because this setting is hidden for single extruder machines...

I don't know, if this can be overridden by the machine settings.

The workaround is: create a profile with disabled prime tower (while the "normal" UM3 is the current printer).

[ahoeben 1,955]

Good catch. I have updated my gist with a *much* simpler version that also fixes this issue.

[DidierKlein 729]

Cool stuff guys thanks for helping