Jump to content

Vertical turbine print issues at certain height.


vmuddu

Recommended Posts

Posted · Vertical turbine print issues at certain height.

Hi everyone,

I am trying to print vertical axis wind turbine, but my print fails at a certain height. I've used the recommended print settings for the TOP WING. Can anyone help me how to overcome this issue? Many thanks in advance.

Thank you

Vik

1.thumb.jpg.5c7e51b2e4898ecc6258f451b500123f.jpg[/media]

1.thumb.jpg.5c7e51b2e4898ecc6258f451b500123f.jpg

  • Link to post
    Share on other sites

    Posted · Vertical turbine print issues at certain height.

    stringing is often cured by lowering the print head temperature, strange that it starts only towards the top (cant see the inside of the front part, but I assume its there too)

    maybe you could try dropping the temp by say 5 degrees - you could use the 'Tweak at Z plugin' so you don't have to sit and wait to make the change

  • Link to post
    Share on other sites

    Posted · Vertical turbine print issues at certain height.

    stringing is often cured by lowering the print head temperature, strange that it starts  only towards the top (cant see the inside of the front part, but I assume its there too)

    maybe you could try dropping the temp by say 5 degrees - you could use the 'Tweak at Z plugin' so you don't have to sit and wait to make the change

    Many thanks for your response. I tried reducing temperature, but no luck ! However, I'll try to use the 'Tweak at Z plugin'.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...