tomilla 0 Posted August 17, 2017 in Modify Cura 2.7 for 3DSolex Hardcore Printcores Hi, has anybody already modified cura for the 3Dsolex Hardcores? looks like you only have to add the config files for the different nozzle sizes in resources/variants Share this post Link to post Share on other sites
ahoeben 420 Posted August 17, 2017 in Modify Cura 2.7 for 3DSolex Hardcore Printcores And, for best results, you would have to create profiles for all of the materials for all the variants you add. Not a trivial undertaking. Share this post Link to post Share on other sites
tomilla 0 Posted August 17, 2017 in Modify Cura 2.7 for 3DSolex Hardcore Printcores (edited) Exactly. Or just copy and modify the existing Profiles for the 0.8 and 0.4. But i think it's easier to change the values one time than changing it on every nozzle and material change. Question is - has anybody done it? Edited August 17, 2017 by Guest Share this post Link to post Share on other sites
ViperJet 0 Posted August 18, 2017 in Modify Cura 2.7 for 3DSolex Hardcore Printcores (edited) Hi Tomilla. Can you describe more detailed what you have done? Which files you named how and what is the content of? I stuck to get my HardCore's into Cura with different nozzles. Kind regards, Udo Edited August 18, 2017 by Guest Share this post Link to post Share on other sites
