Jump to content

Upcoming Print-Preview-Throne of the Nautlius King


kmanstudios

Recommended Posts

Posted · Upcoming Print-Preview-Throne of the Nautlius King

Who knows when this will be done. My design speeds far outpace my print speeds. And, that is assuming the designs are worth a crap. But, he's one cool mollusk.

Throne of the Nautilus King.

Well, this little beastie will be a chore to print. 169 hours just for the main part: The Nautilus King main body on top of the blackish base with the sunglasses. Mostly made of fractals that I assembled. I just like weird stuff.....

None of my current prints takes less than 3 days and most about 4.5 on average.

The CeegarSmoke (That is what I named it) will only take 1.5 Hours. I took the Nautilus syphon and turned it into a cigar. The CeegarSmoke is a separate piece to be affixed.

The Sunglass Lenses will take 1.5 Hours. Again, separate pieces to be affixed.

I am not sure about the base as I have the base design finished, but none of the electronic 'holder/mounting' parts sized or designed for the internals. I know I have enough room.

Height will be about 200mm, made to be lit from inside with varying degrees of transparency and colors using a variety of paints and snaking Fibre Optics as well as Neon Glow Fibre Optics. So, I gotta figure how many and what size everything will be to print the base.

NautilusKing_01.jpg

NautilusKing_02.jpg

NautilusKing_03.jpg

NautilusKing_04.jpg

  • Like 1
Link to post
Share on other sites

  • 2 weeks later...
Posted · Upcoming Print-Preview-Throne of the Nautlius King

Oehh looks very interesting! I can not help to read 'Game of Thrones, the nautlius king' the first 4 times I read the title. I guess they own the word 'throne' now :p Will you also print it completely hollow if you want to illuminate various parts, or will you use infill to your advantage and use it to add effects to your model?

  • Link to post
    Share on other sites

    Posted (edited) · Upcoming Print-Preview-Throne of the Nautlius King

    It is to be printed hollow with light tube paths for neon and regular fibre optics. Right now I am printing out some things to see how well my plans for tubing go. It is taking forever to get the material out of the tiny areas and you can see that through the clear PLA. So, that is what is taking so long. A lot of tests to get the light paths correct and also find out about getting all that PVA out of some tough areas.

    Edit: Added Pics.

    This is the solid view. I added the Mohawk since I first posted.

    NautKingSolid.jpg

    X-Ray view to show thin skin from hollowed object. And, no red areas :)

    NautKingX-Ray.jpg

    Sliced view at about mid level of the ceegar. I went with the line type color so you could see the walls and hollows better. But, wow, it is a confusing set of images.

    NautKingLayered.jpg

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...