Missing layers in Gcode-File

[lemy 0]

Hello @all,

I have the following Problem : I try to print out a 3D-Model of a Car but everytime I generate the GCode-File there are missing layers. after layer 226 there are 10 layers fullfilled like Bottom/Top, following by 10 empty layers and following again 10 fullfilled Layers. In a second Object the Layers are all good.

Any Idea what the Problem is ?

I have uploaded a ZIP-File with the STL- and GCode files and a Screenshot from Cura 2.6.2.

I Try it in Cura 14.07 and 2.6.2 but both the same problem.

My Settings : 0.1 mm layerthickness, 1mm Shell, 30mm/s printing speed, 1.75 filament, 10% fillment

Download files

Best Regards

[burtoogle 514]

The model's broken, here's what FreeCAD thinks of it:

[burtoogle 514]

I used the "Keep Disconnected Faces" Cura option and it sliced better:

[burtoogle 514]

Just noticed that the skirt doesn't go around the car, it goes under it!

EDIT - just noticed that's OK because the car body rises above the build plate.

Edited September 4, 2017 by burtoogle

[lemy 0]

I used the "Keep Disconnected Faces" Cura option and it sliced better:

I 've tried it but the Gap is still there. if you rotate the Model you will see it too.

[lemy 0]

I used the "Keep Disconnected Faces" Cura option and it sliced better:

I 've tried it but the Gap is still there. if you rotate the Model you will see it too.

I tried it second time and now it looks better :-)

[burtoogle 514]

Good, but remember, the model is badly broken. You need to fix it to be able to reliably print from it.