Jump to content
Ultimaker Community of 3D Printing Experts

Cura creating unnecessary extra wall segments


wormsquiggle

Recommended Posts

Posted · Cura creating unnecessary extra wall segments

Hi,

I'm having this issue with Cura 2.7.0 when I specify a wall line count and zero infill it generates extra line segments and extra travel moves that are unnecessary. The model can be found here:

https://www.thingiverse.com/thing:523972

CuraExtraWallSegments.thumb.PNG.2577367f03bb238b11905be302c7f3b0.PNG

CuraExtraWallSegmentsFull.thumb.PNG.be4835dc5e2136bbe104d4e3fba075f5.PNG

Even if i set a wall line count of one, it still does it.

CuraExtraWallSegments1.thumb.PNG.748a9cc455c32bef8786a67f7b9d6066.PNG

Anyone know if i'm doing something wrong? I would like to print the wall with a 3 line thickness but don't want all the stringing this will produce

Thanks so much for any help :)

CuraExtraWallSegments.thumb.PNG.2577367f03bb238b11905be302c7f3b0.PNG

CuraExtraWallSegmentsFull.thumb.PNG.be4835dc5e2136bbe104d4e3fba075f5.PNG

CuraExtraWallSegments1.thumb.PNG.748a9cc455c32bef8786a67f7b9d6066.PNG

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...