No Extruder axis E... in Gcode

[ultimate-x 0]

For the comb and skirt feature I like to switch to skeinforge

In the gcode, the freshly installed skeinforge 46 cerates no commands for the extruder axis in the G1 lines.

Where is the setting to generate the G1 like: G1 X0.9404 Y0.9425 Z0.1600 F1500.0000 E0.0000?

Thanks for your help

[ddurant 0]

You need to activate Dimension.

Make sure to measure your filament diameter accurately and put it in there, too.

[Daid 306]

If you are running windows. viewtopic.php?f=8&t=153 this version has all the default settings correct.

[ultimate-x 0]

Thank you for the tip

I'll try this Week end

Michael

[ultimate-x 0]

Tried the pypy and the result looks really good. I will need some calibration for my modified extruder but that's no big deal.

It's fast and the results I think the results will be quite good.

Thanks for the support