Thanks, I am considering the + kit so its recommend?
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
IRobertI 520
There is not. However, except for the nozzles which will be useless to you without an Olsson block (which I highly recommend), the other parts can be used on your machine as well. The more powerful heater and the new PT100 might lead to some temperature swings at the very start of the print but I don't think this should be any real issue. You might also want to buy a spacer to replace the spring above the PTFE as the TFM that comes with the maintenance kit will work better with the spacer. The spacer is cheap.
If you can afford to pay a little extra, the extrusion upgrade kit is a very nice option worth looking into as well.
Link to post
Share on other sites