Having Issues With Fill Density

[AzViper 0]

If I select 0% Fill Density the entire object is solid. If I print 100% its a solid while using 3.1, but if I use 15.1 with O% the item prints the way the designer has intended. Really bugged as I want to use the latest software.  

[gr5 2,266]

It should work.  What did you choose for your wall width?  If you set that larger than your part size then it will have walls so thick it is also 100% filled.  I think a screenshot showing your settings and what your part looks like in slice view would be helpful.

[AzViper 0]

Dang. That was the problem it was set at 4mm when it should have been 0.4. Thanks for pointing that out.