UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Assuming like most cad software your software stores an object internally as a circle (or cylinder/cone/sphere) but when you export to STL there should be options to control how much precision you want for your circles and all surfaces. At that moment your circles are likely getting chopped up into multiple segments.
As gr5 said, search for the STL-export settings in your CAD-program.
In DesignSpark Mechanical you have the options course, medium, fine, and custom. Fine is a good balance between file-size and smoothness, although the triangles are still visible in balls. Course and medium are too rough to my taste.
For really smooth surfaces, a custom setting is required. But be aware that a finer setting (=more triangles and thus a smoother curve) can soon make the file-sizes really huge and unmanageble. Instead of 2Mbyte it may easily jump up to 20Mbyte. And this might create other issues: the slicer slowing down, printer slowing down, wasting 95% of hard disk space for little improvements,...
So I would suggest that you experiment with all settings to compare the results, and then go for a good balance between quality and file size.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
gr5 2,224
This is a cad setting.
STL files contain only triangles.
Assuming like most cad software your software stores an object internally as a circle (or cylinder/cone/sphere) but when you export to STL there should be options to control how much precision you want for your circles and all surfaces. At that moment your circles are likely getting chopped up into multiple segments.
Link to post
Share on other sites
geert_2 558
As gr5 said, search for the STL-export settings in your CAD-program.
In DesignSpark Mechanical you have the options course, medium, fine, and custom. Fine is a good balance between file-size and smoothness, although the triangles are still visible in balls. Course and medium are too rough to my taste.
For really smooth surfaces, a custom setting is required. But be aware that a finer setting (=more triangles and thus a smoother curve) can soon make the file-sizes really huge and unmanageble. Instead of 2Mbyte it may easily jump up to 20Mbyte. And this might create other issues: the slicer slowing down, printer slowing down, wasting 95% of hard disk space for little improvements,...
So I would suggest that you experiment with all settings to compare the results, and then go for a good balance between quality and file size.
Link to post
Share on other sites