Order of Print

[mcdavidr 0]

I am running Cura 3.2.1 and have a question about determining the print order of multiple objects. I like to print a small one layer circle or square before starting a print.

I place my primer piece in a corner of the bed well away from the main print. I chose print one at a time. Problem is sometime Cura prints primer first, sometime not. The only way to tell is run layers.

Is there a way to request Cura print the primer first?

[burtoogle 515]

Settings -> Travel -> Layer Start X/Y

[mcdavidr 0]

Thank you