Jump to content

UM3E - Automatic Levelling fails but insists on repeating the print cycle


Recommended Posts

Posted · UM3E - Automatic Levelling fails but insists on repeating the print cycle

(I had versions of this problem last week)

 

This morning, I started a new print. Automatic Leveling activated and decided the print cores were not alighed. Before I took any further steps, it tried to start the print again, going into automatic leveling, with the same result. Even when I switched the machine off and on again, it immeidately tried to start printing with the same Leveling failure. I must have had five levelling failures in a row without my being able to pause things to assess what to do next.

 

In between all this, I cleaned the print bed and the tip of the print cores and it eventually decided to print. The point about this is that the machine/software takes on a mind of its own.

 

I downloaded the relevant coding dump. How do I get that to you?

  • Link to post
    Share on other sites

    Posted · UM3E - Automatic Levelling fails but insists on repeating the print cycle

     

    16 minutes ago, FalmouthLouis said:

    I downloaded the relevant coding dump. How do I get that to you?

     

    You can add it to your reply I think?

  • Link to post
    Share on other sites

    Posted · UM3E - Automatic Levelling fails but insists on repeating the print cycle

    a gz file is I think a g-code, which is in fact a list of coordinates telling the Ultimaker which motors to move when (i.e. your digital print). I thought you wanted to send a log?

  • Link to post
    Share on other sites

    Posted · UM3E - Automatic Levelling fails but insists on repeating the print cycle

    I thought that that was what I was doing when I went into the maintenance directory. I probably won't be able to have another go at the log for a couple of days (traveling)

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...