Jump to content

Dramatic speed increase possible with better quality simultaneously!


Uhlhorn

Recommended Posts

Posted (edited) · Dramatic speed increase possible with better quality simultaneously!

Hi Cura developers!

 

I found a way to print 0.1 mm resolution with nearly the print time of 0.3 mm resolution. I wanted to patent it, but a patent is too expensive for me. So I will give the idea to You for free. ?

We (the community) can use Cura for free. So I think I can give back something. ? Cura is my favourite slicer. And I like to see this idea in the best slicer of the world.

 

So, If You are interested in my idea to get 0.1 mm resolution with nearly the speed of 0.3 mm resolution, please answer to this post. I will give You the idea for free. But I don’t want to publish it here in the forum, because You should have time to develop this function before other can copy it. ?

 

Are You interested? The solution is very easy, You will not believe! But it can only found by a "out of the box" thinker.

Edited by Uhlhorn
  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    I assume the idea is that you print outer perimeters at 0.1mm but print infill with 0.3mm only every 3rd layer.

    If so this had already been implemented in cura; see "Infill Layer Thickness" option.

    Since I don't know what your proposal is about below linked thread might be similar:

    (note that #ctbeke explained that for good structural integrity walls need to be kept at same layer height - and I assume that's the reason why only infill thickness is configurabel but not inner walls.)

    But the devil in the details so I'd definitely be interested in your idea - I myself do experiment with developing a post processing script that more-or-less does what I described above.

     

     

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    I don't think trying to be secretive about some great idea is going to benefit anyone except possibly yourself.  The thing is, the whole of Cura is opensource.  There are no secrets hidden there to a person with the programming and printing know how and a work ethic to understand it.  This is where the strength is in the organization model.  Holding an idea secret is withholding information from the group who has done so much to help one another in this community driven effort.

     

    Sharing some break through idea here among experts and novices may be the best way to move it forward via feedback and brainstorming which would undoubtedly improve on the base.  What could be the possible harm?  So what if some other slicer or company grabs the idea?  Posting it here prevents any party from monopolizing such ideas by establishing prior art.

     

    I think the whole post is more likely some kind of baiting exercise...

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!
    5 hours ago, BoostedGcode said:

    I assume the idea is that you print outer perimeters at 0.1mm but print infill with 0.3mm only every 3rd layer.

    Yes, this was the idea.

    Okay, other people had the same idea. I didn’t know. So this idea has been implemented already.

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    I was prejudgmental.  Please accept my appology.

     

    Matt

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    @Matt: No problem, don’t worry! All is fine. ?

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    It works. ?

     

    But what are these tiny yellow things on the rough infill? They need a lot amount of time. How can I remove them?

    (Yes I know, removing them will reduce the strength of the printed component.)

     

    1540512005_Screenshot2018-06-0818_08_54.thumb.png.b1c1835ef461c2333f75ed4dc4067070.png

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    You can already print thicker infill in Slic3r or Kisslicer.

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!
    2 hours ago, eldrick said:

    You can already print thicker infill in Slic3r or Kisslicer.

    Have you done any testing with Slic3r or Kisslicer in terms of how much time is saved?

    I looked at the gcode Slic3r produced (settings are not exactly same as Cura - I'll try to see if I can do a better job) but it seems Slic3r does not put the extra dots Uhlhorn was talking about thus "combine infill" printing time is greatly reduced compared to Cura's "Infill Layer Thickness" feature...

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!
    4 hours ago, Uhlhorn said:

    They need a lot amount of time. How can I remove them?

    Hi Uhlhorn, this is what I found annoying too.

    That's why I started to write a post processing plugin to use a different implementation to achieve something similar as Infill Layout Thickness...

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!
    5 minutes ago, BoostedGcode said:

    Hi Uhlhorn, this is what I found annoying too.

    That's why I started to write a post processing plugin to use a different implementation to achieve something similar as Infill Layout Thickness...

    Ah, interesting. Is it working? Is it possible to get this and where?

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    Still in the works hopefully I can share it early next week. First test were promising now I'm ironing out bugs.

  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    Nice to know. ?

  • Link to post
    Share on other sites

    Posted (edited) · Dramatic speed increase possible with better quality simultaneously!

    I managed to publish my post processor script to do something similar.

    Here's an article on it including the instructions:

    http://www.customize-3d.com/faster-high-resolution-3d-printing.html

     

    Feel free to give it a try. Note that I haven't tested it on complex models nor support...

    Edited by BoostedGcode
    typos
  • Link to post
    Share on other sites

    Posted · Dramatic speed increase possible with better quality simultaneously!

    Thank You. I’ll test it.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...