Jump to content

Horizontal "bands" in print


Verne64

Recommended Posts

Posted (edited) · Horizontal "bands" in print

I have this weird issue with horizontal bands showing up in my print, and am hoping someone can shed a light on the reason for this. I'm using a bit of an unorthodox nozzle size and leyer thickness, but I don't think that is what's causing the issue. 

I am printing on an Ultimaker Original+ with a 1,8 mm nozzle. My layer thickness is anywhere between 0,4 mm and 1 mm. Print speed from 20 mm/s to 38 mm/s (I  make all speeds equal in Cura except for the initial layer, to prevent large pressure changes in the nozzle). I am printing in spiralize mode. The filament I am using is HiPs.

 

DSC_0285.JPG

As you can see in the photo that I have attached, I get some pretty obvious horizontal lines over the printed surface. I tried messing around with different speeds, layer thicknesses and acceleration and jerk settings, to no avail. I took a real hard look at my layer preview in Cura and discovered that the horizontal lines are actually present in the preview and can bee seen in some angles (second image). I also noticed the location of the lines changes when I use different layer thicknesses. I think the lines show up every thirteenth layer, independent of layer thickness.

 

print-defect2.thumb.jpg.784054bc914dd1310dea10f50b1a9ce8.jpg

 

Can anybody tell me what could cause this issue? And maybe more importantly, how to fix it?

 

Edit: The problem doesn't occur without spiralize contour being turned on. However, I would like to spiralize, because of the z-scar...

 

 

Edited by Verne64
  • Link to post
    Share on other sites

    • 4 months later...
    Posted · Horizontal "bands" in print

    I am not sure how I landed here and its an old post, but I do know the solution for this. You have probably figured it out already but I thought I will share just in case. Just disable the "Smooth Spiralized Contours" option below the spiralize option. After that you shouldn't see these lines in the layer view and if that happens, then they won't show up in the print as well.

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...