GCode Simulator & Printer - Test on Ultimaker

[mdietz 0]

Hi,

I have developed GCode Simulator & Printer App for Android which allows one to use a tablet/phone with USB-OTG support to control your printer.

Printing from a Galaxy Tab 2 on my Reprap printer with Sprinter/Marlin firmware works great, but I don't know if it works on Ulitmaker printers.

It would be great if Ulitmaker owners could test the GCode Simulator (Free) App and provide feedback.

Find more info on http://www.dietzm.de/gcodesim

Thanks in advance !

 

[snowygrouch 1]

I will have a look when I get back from holiday

 

[keesjalink 0]

Hi all,

is there any progress on this issue yet?

I desperately need to control UM I from a tablet running android.

Thanks, keep up the good work, Kees

 

[Nicolinux 288]

If that's not an option anymore, I suggest you take a look at OctoPrint:

http://octoprint.org

 

[mathias-dietz 0]

Hi Keesjalink,

not sure what you mean with "issue" ?

GCode Simulator & Printer App for Android is available in the Google App Store already.

It works with many printers (reprap, printrbot, ...), I just did not get feedback from Ultimaker users yet.

Please install the free version and try if the basic printer control works on Ultimaker.

If so, printing with the full version should be fine as well.

https://play.google.com/store/apps/details?id=de.dietzm.gcodesimulator&hl=de

Thanks

Mathias

 

Hi all,

is there any progress on this issue yet?

I desperately need to control UM I from a tablet running android.

Thanks, keep up the good work, Kees

 

[keesjalink 0]

Thanks. I had the impression no-one had tested it yet but if it should work, I'll risk a few bucks...

Trying tnight.

Kees