UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Ultimaker S5 having trouble printing large footprint object
Posted
· Ultimaker S5 having trouble printing large footprint object
You are probably printing too fast (too much volume) for the temperature. Try cutting the infill speed in half in cura or (only if PLA) try raising the temperature by 20C (but don't go over 240C). Or make the layer height smaller.
Here are top recommended speeds for .2mm layers (twice as fast for .1mm layers) and .4mm nozzle:
20mm/sec at 200C
30mm/sec at 210C
40mm/sec at 225C
50mm/sec at 240C
The S5 can do double these speeds but with some difficulty.
If the above speeds (DANGER - cura has many speeds - check them all) are exceeded for your printing temp and layer height then that's the problem. If they are not exceeded then you have a hardware problem. I can help you diagnose if it's the core or the feeder.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
gr5 2,224
You are probably printing too fast (too much volume) for the temperature. Try cutting the infill speed in half in cura or (only if PLA) try raising the temperature by 20C (but don't go over 240C). Or make the layer height smaller.
Here are top recommended speeds for .2mm layers (twice as fast for .1mm layers) and .4mm nozzle:
20mm/sec at 200C
30mm/sec at 210C
40mm/sec at 225C
50mm/sec at 240C
The S5 can do double these speeds but with some difficulty.
If the above speeds (DANGER - cura has many speeds - check them all) are exceeded for your printing temp and layer height then that's the problem. If they are not exceeded then you have a hardware problem. I can help you diagnose if it's the core or the feeder.
Link to post
Share on other sites