start g code

[Smokie 0]

hello  i would like to use the same start g code as in cura 3.10 in the newer version(s) 3.6 or 4.0

 

how to do this?

 

wr Henk

[DivingDuck 105]

Settings ->Printer ->Manage printers -> choose your printer ->Machine settings ->printer.

Copy your old start g-code and replace/paste the existing g-code

[Smokie 0]

hello diving duck thanks fore the reply 

 

i have tried already some things

 

my qu are : must i do this in the new cura version

                   how to do this so i dont have to do it every time again

 

maby a bit stupid but i cant get it working

 

wr Henk

 

[DivingDuck 105]

Well, good question. The lasts two updates I hadn't any luck with reimporting of existing profiles due to compatibility issues between the versions. So I made my profiles for material, printers and adjustments with every update new. Didn't try the actual 4.1 as I will wait for plugin updates and some experiences in the field before I update.

 

...but I still hope they will manage this some when w/o the need to do this manually

[Smokie 0]

oke if forgotten to copy the m117 line now its working 

 

thanks diving duck!!

[DivingDuck 105]

Your welcome.