Jump to content

Flashforge Dreamer Profile?


Carla_Birch

Recommended Posts

Posted · Flashforge Dreamer Profile?

I been trying for a bit now to get a working profile so i can use Cura for my Flashforge Dreamer printer but i'm not having much luck at all, does anyone happen to have a working printer profile they could share or give help in setting one up?

 

Here is the code that flashprint puts out when you slice with that: https://pastebin.com/HmkDRv3T

  • Link to post
    Share on other sites

    • 3 months later...
    Posted · Flashforge Dreamer Profile?

    hi there!

    i am currently working on a flashforge dreamer3d profile and i made it work perfectly fine with one extruder.

    unfortunately cura adds a line with T0 to the gcode file when you activate the second extruder which makes the file unusable..

     

    but as long as you stay with one extruder everything works fine..  i'm on it 😉   

     

    https://github.com/valueerrorx/Flashforge-Dreamer3d-Cura-Definitions

  • Link to post
    Share on other sites

    • 3 weeks later...
    Posted · Flashforge Dreamer Profile?
    On 1/24/2020 at 11:39 AM, xapient said:

    hi there!

    i am currently working on a flashforge dreamer3d profile and i made it work perfectly fine with one extruder.

    unfortunately cura adds a line with T0 to the gcode file when you activate the second extruder which makes the file unusable..

     

    but as long as you stay with one extruder everything works fine..  i'm on it 😉   

     

    https://github.com/valueerrorx/Flashforge-Dreamer3d-Cura-Definitions

    Is the code for the left or right extruder? I personally use the left one for PLA as it works better with being closer to the cooling duct.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...