Jump to content

3D Print Issue


Philiom

Recommended Posts

Posted · 3D Print Issue

Hi, I have created a Soft Vice Jaw for my workshop in Auto Fusion 360, I saved as an STL then converted to gcode via Cura 4.3, when it goes to print the extruder starts at the edge of the bed and the print starts but the size is about 50% of the size I need, the Cura software states the dimensions are as created in Auto Fusion 360 but just wont print in the centre of the bed as shown on the Cura, and the size is wrong, the printer is a Balco 3d HE 180021,  can anyone help?

  • Link to post
    Share on other sites

    Posted · 3D Print Issue

    For your question about not printing in the center I think you need to change this setting for your printer

    image.thumb.png.b889b645a218098eb023a5afcf0c25b7.png

    But the scaling part I am not sure.

    Does cura show the right dimensions if not it is most likely a problem with exporing the part form Fusion

    You could check if you are exporting in the right dimenions so: mm or inches.

    when you go to export (as stl) I belief there is a tab named 'settings' where you can change a lot of thing (not sure about this though)

  • Link to post
    Share on other sites

    Posted · 3D Print Issue

    Hi Nick, thanks for the response, I have tried an old file which was something I made a while ago and the printer starts it OK so I guess the printer is alright.

    I have enclosed the settings, the file was created in mm in Auto Fusion 360, I used Cura v4.0 but upgared to 4.3 after the problems occured but its still the same.

    Screenshot (1).png

    • Like 1
    Link to post
    Share on other sites

    Posted · 3D Print Issue

    Tonight I made the same size piece in Tinkercad that I did in Fusion 360, it does the same thing, it does not centre even when the box is ticked in the machine settingsin Cura  and is shown as central when displayed in Cura. I have made another piece that I created in Fusion 360 / Cura about 4 months ago and it prints perfectly, I am pretty sure is not F360, I have tried 3 different versions of Cura and they are all the same, it starts in the nearside left hand corner and starts to make it at about 50% of the size, the filament is not sticking very well to the bed either(no problem on previously items that I made in g code) and the printer starts jittering now and then, I think its a gcode problem but unable to get to the bottom of it, may try another another gcode creation software, any one know which is an alternative to Cura just to compare?  

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...