Miniatur Spring

[Ksstyling 12]

Hallo,

 

Yesterday I printed a very small and fine torsion spring.

I was very surprised how well that worked and how easily he printed the torsion spring.
 
The spring has a diameter of 0.6mm theoretically and practically are 0.58-0.64mm.

She is printed with a 0.25core and pla and breakaway from Ultimaker.

The threaded nut has an M4 thread

[Smithy 1,146]

Cool! 🙂 

But be aware that the PLA will break some day, so if you need the spring/flexible function you should consider another material than PLA.

[Ksstyling 12]

Thats only for a Lego Model 😄 only for show 😄 no function

[Smithy 1,146]

Ahh ok, then it is fine. But very cool in that size!