Jump to content

Mark 2 With Cura 4.4


Recommended Posts

Posted · Mark 2 With Cura 4.4

I had a mishap with my hard drive so had to install Cura so decided to go for the latest, it took a few attempts for cura to slice a model for the Mark 2 I think the heads were disabled (?)  any ways I got cura to slice but when I look at the printer under preferences machine setting there is a start script for the printer and end script but when I select extruder 1 or 2 there are no scripts just material ,diameter (2.85) nozzle offset X 0.0 Y 0.0 cooling fan number,, no  nozzle sizes nothing is this correct, sorry for the vagueness but did use the UM2 much lately but now need it.. any advise welcome

  • Link to post
    Share on other sites

    Posted · Mark 2 With Cura 4.4
    12 hours ago, bob-hepple said:

    when I select extruder 1 or 2 there are no scripts just material ,diameter (2.85) nozzle offset X 0.0 Y 0.0 cooling fan number,, no  nozzle sizes nothing is this correct

     

    i think so...

    • extruder specific scripts are not needed (what would you expect there....?
    • and i guess (not sure) the nozzle diameter is hidden, because there are several pre-defined "variants" for each extruder (which can be selected from the drop-down list in the settings panel)
  • Link to post
    Share on other sites

    Posted · Mark 2 With Cura 4.4

    tinkergnome

    thanks for the reply, I think I was thrown a little by the little information on screen,  I seem to remember possibly  nozzle diameters,  but I am probably wrong,  I know the nozzle size is in advanced and found that setting in latest cura,, as I said many times I have not used cura or my UM2 for a long time and just trying to setup now in latest software, thanks for the advise I think it wont be the last time I ask, as setting up my Mark 2 I find difficult..   

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...