Cura Slices are rebooting my printer

[johnday29 0]

I installed several plugins and have messed with so many settings I have no idea which one is causing me problems but every time I try to print anything newly sliced I get an Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38 

and the printer reboots.  Here is my log info if anyone can help I would be very grateful. Thanks

 

 

Send: N29 G1 X1.2 Y200.0 Z0.3 F5000.0*57
Recv:  T:249.48 /250.00 B:79.98 /80.00 @:56 B@:86
Recv: echo:busy: processing
Recv:  T:249.41 /250.00 B:79.92 /80.00 @:58 B@:110
Recv: echo:busy: processing
Recv: ok
Send: N30 G1 X1.2 Y20 Z0.3 F1500.0 E30*120
Recv:  T:249.48 /250.00 B:79.88 /80.00 @:55 B@:124
Recv: ok
Send: N31 G92 E0*117
Recv:  T:249.68 /250.00 B:80.03 /80.00 @:51 B@:76
Recv: echo:busy: processing
Recv:  T:249.82 /250.00 B:80.20 /80.00 @:50 B@:17
Recv: echo:busy: processing
Recv:  T:250.37 /250.00 B:80.13 /80.00 @:35 B@:37
Recv: echo:busy: processing
Recv: ok
Send: N32 M117 Bad accuracy*79
Recv: X:1.20 Y:20.00 Z:0.30 E:0.00 Count X:120 Y:8995 Z:94
Recv: ok
Recv: ok
Send: N33 G1 Z1.0 F3000*40
Send: N34 M117 Autobots! Roll Out!*101
Recv: ok
Send: N35 G92 E0*113
Recv: ok
Send: N36 G92 E0*114
Recv: X:1.20 Y:20.00 Z:1.00 E:0.00 Count X:120 Y:8443 Z:94
Recv: ok
Send: N37 G1 F3600 E-7*0
Recv: X:1.20 Y:20.00 Z:1.00 E:0.00 Count X:120 Y:8415 Z:94
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: ok
Send: N39 M107*31
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv:  T:250.37 /250.00 B:80.05 /80.00 @:36 B@:61
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N38 M117 Printing ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 - Layer 0 ANETA6_Titan_Aero_X_Carrier_for_Anet_A6_-_V2 of 274*72
Recv: Error:No Checksum with line number, Last Line: 37
Recv: Resend: 38
Recv: ok
Send: N39 M107*31
Recv: Error:Line Number is not Last Line Number+1, Last Line: 37
Recv: Resend: 38
Printer keeps requesting line 38 again and again, communication stuck
Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 38 again and again, communication stuck"
Send: M112
Send: N40 M112*21
Send: N41 M104 T0 S0*20
Send: N42 M140 S0*83
Changing monitoring state from "Error: Printer keeps requesting line 38 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 38 again and again, communication stuck)"
Connection closed, closing down monitor
Closing down send loop

[Smithy 1,144]

Sounds like a communication problem between Cura and your printer. 

You can try to print via SD card or try another USB cable.