Try and set Z seam alignment to random.
That mean every layer won't start at the same position
Try and set Z seam alignment to random.
That mean every layer won't start at the same position
I already tried that but it just makes the bumps randomly instead of consistently
btw they are always in the same spot on the print
Edited by ChaseAteItOn 1/6/2020 at 4:50 AM, AndersK said:Try and set Z seam alignment to random.
That mean every layer won't start at the same position
Thanks for the reply though!
Edited by ChaseAteIt
Recommended Posts
ChaseAteIt 0
Btw I am using an ender 3 with pla at 200c I believe
Edited by ChaseAteItLink to post
Share on other sites