How to prevent bottom layers in the middle of the print?

[xrmb 2]

Hi there,

 

I'm trying to print a bowl, where the STL is actually a solid object. Easy, I'll use 0% infill, 2mm bottom layers, 2mm walls and 0mm top layer... preview looks almost like what I would expect. Except, there are extra bottom layers added in the middle of the print.

 

I attached a screenshot, but basically I want to prevent CURA from making more (yellow) bottom layers mid print... like I show at layer 83. No idea what bottom that would be of... it stops later (see second attachment for full object preview).

 

Thanks in advance.

[burtoogle 514]

Could you please save the project file (File -> Save) and attach the .3mf file to this thread, thanks.

[xrmb 2]

Nothing easier than that. (Hope I didn't click a hidden setting that enables that)

 

 

bowl-9-saw-twisted.3mf

[burtoogle 514]

All you need to do is increase the value of skin removal width, 3 is OK...

 

[xrmb 2]

Awesome. Another setting I'd have never guessed to cause the problem.