it bother people a bit (but its normal in a fablab ) but I would like to solve it because it feels like metal is grinding somewhere which is not good on the long term ...
- 2 months later...
Hi
Did you find the cause to this sound? My UM3 just started making such noise as showed in youtube movie...
Edited by tnesheimHi , no i didnt' find where i comes from .....and nobod from Ultimaker replied . ..
- 10 months later...
old problem and maybe you fixed it, but sounds like you used the gear oil instead of the ptfe goop to lube the z screw
- 6 months later...
Hey Ke20. I had the exact same issue with my 2+ after greasing the Z-axis screw with lithium grease. I removed the lithium grease and applied PTFE grease, which immediately solved the problem. Hope that helps!
Recommended Posts
gr5 2,224
I've heard worse noises but not this particular noise. I'm pretty sure it will print just fine but I assume it's bothering the nearby humans?
Link to post
Share on other sites