Jump to content
UltiMaker Community of 3D Printing Experts

Runde Platte drucken

tbadde

By tbadde
in Deutsch

 Share

Recommended Posts

tbadde

tbadde 0

Posted
Posted · Runde Platte drucken

Hallo

Ich möchte eine Runde Platte mit einem Loch drucken. (STL angehängt)

Der Drucker fängt nun in der Mitte an zu drucken und druckt dann erst nach innen, dann fährt er zur Mitte und druckt nach Außen. (Bild angehängt)

Weiter macht er nach jeder Umrundung einen Versatz der deutlich zu sehen ist.

Ist es möglich das ich die Platte komplett von Innen nach Außen ohne Versatz drucken kann?

Welche Einstellungen muss ich vornehmen?

Danke und Gruß Thomas

1952456815_UmrandungStrahler.thumb.jpeg.b19e7429ca36d372dc305a576fd14cf2.jpeg

Umrandung Strahler.gcode Umrandung Strahler.stl

    • Link to post
    Share on other sites
    Smithy

    Smithy 1,135

    Posted
    Posted · Runde Platte drucken

    Du kannst versuchen bei "Top/Bottom Patterns" statt Lines auf Concentric zu stellen, falls nicht schon geschehen. (Im englischen Cura, heißt im Deutschen ähnlich aber anders)

     

    Speichere bitte auch dein Cura Projekt als Projekt ab und lade die Datei hier hoch, dann können wir dein Projekt mit den Settings einfach in unser Cura laden.

     

    Cura plant manchmal recht unlogische Wege beim Druck, da kann man wenig dagegen tun. Aber vielleicht hat ja noch jemand anderer eine gute Idee.

     

     

    • Link to post
    Share on other sites
    Allrounder

    Allrounder 22

    Posted
    Posted (edited) · Runde Platte drucken

    .

    Edited by Allrounder
    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 0
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.3 stable released

        UltiMaker Cura 5.3 stable released

        ArunC posted a topic in Ultimaker Cura,

        In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
          • Thanks
          • Like
        • 26 replies
        MariMakes

        Picked By

        MariMakes,
      • Here it is. The new UltiMaker S7

        Here it is. The new UltiMaker S7

        MariMakes posted a topic in Official news,

        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,
      • UltiMaker Cura Alpha 🎄 Tree Support Spotlight 🎄

        Cura Alpha With New Tree Support 🎄

        MariMakes posted a topic in Ultimaker Cura,

        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 22 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...