Wipe: Additional cleaning at the beginning and end of the entire print

[stf 2]

 

Cleaning the nozzle is very important with PETG.
Otherwise the filament will stick to the nozzle. In the case of larger parts, printing will then fail!

 

 

For Cura / Experimental / Wipe please add these two options:

 

1. Additional cleaning at the start
Should be executed after the "Start G-Code".

 

2. Additional cleaning at the end
Should be executed before the "End G-Code".

 

 

Thank you

 

Edited September 14, 2020 by stf

[SensataPDS 2]

a retrofit wipe station would be excellent for me as a mostly cloud based printer