CURA 4.2.1 and up 4.8

[mrSEADEMON 0]

up to version 4.2.1 when printing starts at 200 degrees. This parameter cannot be changed :( TypeAMachines printer
I change all settings of the nozzle to 230 and nothing happens. anyway 200

[Smithy 1,145]

Can you elaborate it a bit more, I am doing hard to understand what is exactly your problem.

[mrSEADEMON 0]

in   4.2.1 has  option default  printing temp

in new don't have.

I put temptiche 230 in new 4.3+ and when printer  start printing tempriche 200 and hase fail.  after   some layer tempriche change to 230

[Smithy 1,145]

Check the "initial printing temperature" which is the temperature, where printing can already start.