Problem with sliceing

[Produktion 0]

Hi!

 

I have a problem with cura 4,8. Se picture, it should be a solid wall. What can i do to solve this? I have reboot and reinstall the software. I have also tried to slice other models with same issue. 

[gr5 2,234]

uncheck "enable coasting".  Almost certainly that gap is caused by "coasting".  It could be many other things so if it's not coasting please go to menu "file" and do "save..." and upload the resulting project file.  Project files contain the machine settings, model, model scale and position and more, and the material settings, the profile, and settings you overrode.