From originally starting printing with Skeinforge, replace.csv easily replaces E with A, and will also remove M codes. There is a replace.csv= place holder in current_profile.ini. I am easily generating 100-200mb gcode files with a 0.25mm nozzle and 0.1mm layers. looking how to properly use the replace.csv in current_profile.ini.
I need to replace E with A, and can work with changing M to ;M, and T to ;T
Skeinforge replace.csv format is
E(tab)A
M(tab);M
but I can't figure out how to format it in current_profile.ini.
Recommended Posts
gr5 2,243
The plugins do all their editing after the gcode is created. So if you think about what a jitter plugin would have to do - I think it's easier to write an entire slicer. In other words it's too hard. I think.
What you ask for would be very appropriate for a plugin (change E to A, remove M codes and comments).
The E to A is the easiest part - you can also do this in most editors. Most editors such as notepad (better to use a really good one like notepad++) can do "replace all" with a search string and replacement string.
The tricky part would be getting rid of all the comments and m codes. Not sure how to do that.
Link to post
Share on other sites