Jump to content

Cura 4.12.1 refuses to save to sd card or access USB


tonyvjr

Recommended Posts

Posted · Cura 4.12.1 refuses to save to sd card or access USB

So after slicing and inserting an sd card. save to removable appears. upon clicking it all of Cura turns grey {{NOT RESPONDING}} appears at the top and after some time. about 3 minutes it writes to sd card. which then windows has to repair to use again. drivers checked, power cycled machine, sd slot checked and verified, 17 sd cards same result.

Also USB connection never detects a printer attached. thanks for all the lectures on what to do with my printers, and how i print, but i don't print over USB. im not buying a rasp pi and more software, when its easily fixed in the software that claims it can do it already.

 

 

Note: if i have to just save to disk and copy it to sd card, or use other things to control a printer over usb {as most "printers" have been able to do forever}  then remove the function, kinda like having a 4 wheel drive setting on a 50cc scooter

Windows 11 pro

Dell G5 SE

Ryzen 7 processor

cura version 4.12.1

 

  • Link to post
    Share on other sites

    Posted · Cura 4.12.1 refuses to save to sd card or access USB

    I have the same problem.  Cura does not "see "sd card or flash drive, and also sdaves to a random location (like "thinking" my cloud storage is a sd card) . Cura is great, but ist time the programmers adress this issue.

    cheers, Maarten

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...