"automatically drop models to the build plate" doesn't deactivate

[Johnn 2]

I didn't use Cura for a while, and now I need to deactivate the option "automatically drops models to the build plate" to keep two STL files at their right positions (one of them is to print supports). I deactivated it but there is no effect on the actual behavior when I drag and drop STL files in the widow : it puts the two STL next to each other on the buildplate instead of putting them at their right place ...
Do someone happened to have this bug too ?
Best regards

Edited December 28, 2021 by Johnn

[ahoeben 1,986]

"Automatically drops models to the build plate" only deals with the Z axis. There's another option "Ensure models are kept apart" you may want to look at.

 

Even if the STLs are put side by side, you can still select them both, right-click and select "Merge models". This does the same as "Group models", but it positions the models back together by their original origin.

[Johnn 2]

"ensure models are kept apart" was already deactivated, but indeed the "Group models" does what I wanted !    Need to first "Merge Models" and then "ungroup models" and it's ready. Thanks

Edited December 31, 2021 by Johnn

[edigarfe 0]

Did you resolved it?

[Johnn 2]

Yes, I explain how to solve it in the previous message. But maybe this has changed since later versions.