Jump to content

Changing Network Detection Port


Recommended Posts

Posted · Changing Network Detection Port

Hopefully someone with more experience with Cura can advise on this, I'm currently trying to setup the Wi-Fi connection to a Monoprice Mini Delta V2 and I have been digging around in various documents all afternoon trying to find what the issue is, essentially it boils down to Cura wanting port 5353 open for initial detection and after testing the printer the only port that's open is port 80.  Is there a way to either switch the detection port to 80 within Cura or be able to manually edit a printer config file to add the right IP and port and skip the detection?



  • Link to post
    Share on other sites

    Posted · Changing Network Detection Port

    The Cura builtin network functionality (print over network) is only working with Ultimaker printers, so changing the port alone will not help in your case.


    You can use one of the plugins like the Octoprint plugin, but I don't know if your printer is working with Octoprint.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
          • Like
        • 16 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    • Create New...