Jump to content

MY PRINTER IS TRYING TO PRINT INTO THE CORNER OF THE PLATE

stavros_nikolaou

By stavros_nikolaou
in UltiMaker 3D printers

 Share

Recommended Posts

stavros_nikolaou

stavros_nikolaou 0

Posted
Posted (edited) · MY PRINTER IS TRYING TO PRINT INTO THE CORNER OF THE PLATE

Hey there, I m wondering if anyone knows what s going on with my printer. Firstly I got my new laptop a few days ago and I download Cura. Before that on the old one it was ok, but now I have a problem. Actually the problem I think it has to do with the slicer cause i had the same problem when i firstly download it on the old one, i fix it but i dont remember how (lol). The problem is that when i transfer the doc from the slicer to my creality CR 6 SE it s trying to go to the bottom left corner and print. It s like it has no limits and it keep going, the gears lose rotations and its cracking until i stop it. If anyone knows what the problem is, please share with me your knowledge 🙂

Edited by stavros_nikolaou
    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...