@GregValiant hum and where i can find that setings on blender?
GregValiant 1,273
Not in Blender...in Cura.
Above all the Cura settings is a search box. To the right of the search box is an icon with three lines on it. Click on that icon and set visibility to "All". Then go down to the Mesh Fixes section and make sure "Remove all Holes" is de-selected.
Edited by GregValiantAh nice i see.
Thx for the help is fixed now ^^
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 2 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
GregValiant 1,273
The most common reason is that in the Mesh Fixes settings "Remove All Holes" is enabled.
Both "Remove all holes" and "Make Overhangs Printable" are for very specific conditions that don't come up often. Neither setting should be enabled unless you have a model that really needs them.
Link to post
Share on other sites