UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Going to a single from a 4 is a huge change. The single thread lead screw should only require 1/4 the torque of the 4 thread lead screw BUT it needs to rotate twice as far to go the same distance in the Z. If your steps/mm were 400 they would now be 1600. If your fastest Z speed was 50 it is now 12.5. It needs to rotate 4 times as fast to hit the same speed it did before. So yes, I could see it missing steps.
If every thing is working free and easy then maybe lowering your max Accel on the Z would help. For reference the default on my Ender is 100. I've lubed the threaded rod with high-moly grease. The max speed it will handle is 45 or it starts to chatter.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
GregValiant 1,342
Going to a single from a 4 is a huge change. The single thread lead screw should only require 1/4 the torque of the 4 thread lead screw BUT it needs to rotate twice as far to go the same distance in the Z. If your steps/mm were 400 they would now be 1600. If your fastest Z speed was 50 it is now 12.5. It needs to rotate 4 times as fast to hit the same speed it did before. So yes, I could see it missing steps.
If every thing is working free and easy then maybe lowering your max Accel on the Z would help. For reference the default on my Ender is 100. I've lubed the threaded rod with high-moly grease. The max speed it will handle is 45 or it starts to chatter.
Link to post
Share on other sites