Jump to content

Twotrees printers tree support


peerhu

Recommended Posts

Posted · Twotrees printers tree support

Hi,

 

When I try to slice with tree support then the generated support partially shown only. Try to add other printers like Ender 3 or Artillery Siderwinder X1 and the problem disappers but with none of Twotrees printers are actually working.

Could someone tell me a hint what can I do please?
Thank you!

  • Link to post
    Share on other sites

    Posted (edited) · Twotrees printers tree support

    The TwoTrees base definition file defines a lot of support settings.  Those settings carry over to all their regular definition files.  The Creality and Artillery definitions do not have support presets in their definitions.

     

    One of the problems may be this line in your "two_trees_base.def.json" file:

     "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 25" }

    The effect of that line is that every time you switch from Normal to Tree supports the Support Density will go to "0" and the problem will show up.

    Related to that is this line:

    "support_wall_count": { "value": 0 }

    With no walls and no infill you have no support stucture except for the brim.

    You should probably go back to TwoTrees support and let them know.

     

    If you go to Custom settings you can make the "Support Density" setting visible and change it to something other than "0" and the support structure will show up. 

     

     

    Edited by GregValiant
    • Like 2
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...