UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
UM3E: Profiles disabled when both extruders enabled, also, bed adhesion extruder cannot be set independently
Posted
· UM3E: Profiles disabled when both extruders enabled, also, bed adhesion extruder cannot be set independently
On 5/27/2022 at 5:19 PM, iccherry said:
Is there some way to get Cura to not disable print profiles when both extruders are on?
No. Simply because it's looking at what quality profiles it shares. Since 0.8 nozzles support less profiles, you get a less profiles. As you already found, disabling the extruder is the fix for this.
On 5/27/2022 at 5:19 PM, iccherry said:
Also, I tend to use brims on my prints for bed adhesion. If you have two extruders active, and set the brim extruder in settings, it changes the brim extruder for *all* the extruders. Lets say you're printing two bodies, one uses Extruder 1 (E1) and the other uses E2. You can't print the brims on each model with the correct respective extruder. If you set the model that uses E1 to print it's brim with E1, then look at the model that uses E2, it will *also* be set to use E1. And if you change that brim extruder back to E2, it overwrites the other model to now use E2 for it's brim. It's weird.
Currently platform adhesion is a global setting (aka; Not extruder dependant). We have a potential fix for that, but it's deceptively tricky. It changes a lot of code to properly facilitate this. It might take some time untill we have that in the main Cura features.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
nallath 1,124
No. Simply because it's looking at what quality profiles it shares. Since 0.8 nozzles support less profiles, you get a less profiles. As you already found, disabling the extruder is the fix for this.
Currently platform adhesion is a global setting (aka; Not extruder dependant). We have a potential fix for that, but it's deceptively tricky. It changes a lot of code to properly facilitate this. It might take some time untill we have that in the main Cura features.
Link to post
Share on other sites