Printing problem Cura 5.0

[Mess 0]

Hi all,

 

So all the setting are the same but look at the picture please. 

Left is good. That's Cura 4.13.1
But Right, is not good. Cura 5.0.0

Is there a simple fix for this?

Thanks!

Edited June 7, 2022 by Mess

[nallath 1,123]

Looks like seam issues. One of the known issues of 5.0 is that the seam placement isn't as good as it used to be. You can try setting a manual one and see if that improves things.