How-To change line width setting mid-print

[rustygriswold 0]

Is it possible (I'm sure it is, everything is with Cura) to change the line width value mid print? I.E. if I have an item with 500 layers that prints at 0.8mm layer width, can I change it to print at 0.4mm from layer 400 until the end?

[ahoeben 1,953]

The short answer is: you can't.

 

The longer answer is: you can change some settings via the Change at Height post processing script, and many more by using a cutting mesh in the per model settings tool, but not all of them.

 

You can change the Wall Thickness with the per model settings tool though. Perhaps that is what you meant to do?

Edited February 5, 2023 by ahoeben