work spase

[chsmith 0]

how do i enlarge my work space

[GregValiant 1,288]

All you can really do is collapse some dialogs.  (This is with Ahoebens "Sidebar GUI" so it may look a bit different than your installation.)

 

 

Under the "View" menu you can toggle "Full Screen" but all it does is hide the Titlebar.

[chsmith 0]

I am trying to make something bigger then the box there is on the screen  can that be done

Edited March 29, 2023 by chsmith

[GregValiant 1,288]

The build volume is defined in the machine settings.  You might be able to cheat a little bit, but you need to be careful.  The model needs to fit within your actual build volume.

Go to "Manage Printers" and then "Machine Settings".  The X (width), Y(depth) and Z(height) determine the build volume.  You can make those whatever you want, but the printer is only so big.

Here is the same model I used above but I've set my Ender to 3000 x 3000 x 5000.  I've moved the model from the midpoint to a location 115 from the left and 115 from the bottom.  I could slice and print this since it is where my actual midpoint is on the printer.  If I move it just about anywhere else, the print head will slam into the end stops.