Resolution problem

[lalosion 0]

Hi everbody,

 

I´m having problems to print a book marker, the letters of "winter is coming" get automatically filled. You know why?

 

I am using:

 

0.2 mm resolution.

 

30% infill.

 

Thanks.

 

[lalosion 0]

Using a Ender 3 

[GregValiant 1,305]

It's hard to tell from far away but that looks very over-extruded.  Have you calibrated the E-steps on the printer?  

Make sure that the filament size is correct in Cura.

In the Machine Settings dialog make sure you have the Gcode Flavor set to Marlin (and not Marlin Volumetric).

On the printer control panel go to the Control / Filament menu and make sure "E in mm3" is turned off.

Also check (just to make sure) that "Remove All Holes" is turned off in Cura.

[lalosion 0]

Hello Greg, I am quite new on the printing world. I think filemant size is set properly and Gcode Flvaor is set to Marlin, also remove all holes is turned off.